Dual Display solution for Embedded board

BWI March 2008 Newsletter


Featured Product: LS-571

(TAIPEI, TAIWAN, 03.03, 2008) -Taiwan Commate Computer Inc.(COMMELL), announces LS-571 525" SBC for Dual Display solution.

If you need Dual display application that means that your system must have a free expansion slot for an add on card, but if there's not enough space in the chassis for the add card, LS-571 will be a good solution to meet your needs. The ability to run multiple monitors via the proper hardware installed is nothing new. Here we aim to provide you with all the best Embedded solutions for dual display in 2 x CRT or 2 x LVDS or 2 x DVI without adding any hardware.

To meet the demands of compact size and enabling dual displays easily, LS-571 series provides the features of such applications.

  • LS-571 Series
    • LS-571TXD2-P: 1 x CRT, 1 x LVDS, 1 x TV-out and 2 x DVI interface
    • LS-571T2X-P: 2 x CRT, 1 x LVDS, 1 x TV-out, without DVI interface
    • LS-571TX2-P: 1 x CRT, 2 x LVDS, 1 x TV-out, without DVI interface


LS-571 Features:

  • Form Factor: 5.25" SBC (203 x 146 mm)
  • CPU: Intel Core 2 Duo (Merom) processor @ 800 MHz FSB
  • Memory:
    • 1 x DDR2 533/667 MHz SODIMM up to 2.0 GB
    • Optional onboard 1.0 GB DDRII SDRAM
  • Chipset: Intel GME965 & ICH8M
  • Real Time Clock: Chipset integrated RTC with onboard lithium battery
  • Watchdog Timer: Generates a system reset internal timer for 1sec/min ~ 255 sec/min
  • Power Management: ACPI 1.0 compliant, supports power saving mode
  • PCI Enhanced IDE: 1 x Ultra ATA/33 IDE channel up to 2 ATAPI devices
  • VGA Interface: Intel GME965 integrated GMA (Graphic Media Accelerator) X3100 Technology
  • Video Memory: Up to 384 MB shared with system memory
  • Serial ATA Interface: 3 x Serial ATA II Interface with 300 MB/s transfer rate.
  • Audio Interface: Realtek ALC888 HD Audio
  • LAN Interface: 2 x Intel 82573L Gigabit Ethernet
  • Solid State Disk:
    • IDE1 supports 44-pin DiskOnModule +5V power supply
    • CompactFlash Type-II on the solder side.
    • (CompactFlash shared with IDE bus)
  • GPIO Interface: Onboard programmable 8-bit digital I/O interface
  • Extend Interface: 1 x PCI slot & 2 x Min-PCI socket
  • DVI Interface: 2 x DVI with onboard 26-pin DVI connector (optional)
  • LVDS Interface: 2 x 18/24-bit Dual-Channel LVDS interface (optional)
  • Internal I/O Port
    • 1 x RS232/422/485, 5 x COM, 1 x silm FDD, 1 x IrDA ,
    • 1 x LPT, 8 x USB 2.0, 1 x 8-bit GPIO, 1 x Audio, 1 x CDIN
    • LVDS and LCD inverter connector, 1 x DVI, 1 x TV-out
    • 1 x SMBus
  • Power Requirement: Standard 20-pin ATX power supply or DC 12V input
  • Board Dimension: 203 mm x 146 mm (L x W)
  • Operation Temperature: 0 ~ 60 C (32 ~ 140 F)
  • LS-571 page
Note: Mass production board will be ready late April / early May '08

BWI ® ● 887D Main Street ● Monroe, CT 06468 ● 203-261-6027 ● FAX 203-261-5061 ● www.bwi.com