 | | | |
|
|
|
| | |
|
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: cBP-6515R/7 |
| Manufacturer: Adlink technology | | 15-slot Combo cPCI Backplane with 12-slot 3U I/O and one CPU slot, right side sys, P2 rear I/O |
| Product Status: Special Order - RFQ - This is a Special Order non-stock / non-standard item. It may be subject to long lead times and minimum orders. Stock Status: Special Order |
|
| Get Quote -> |
|
|
|
Features
- PICMG 2.0 CompactPCI Specification R3.0 Compliant
- PICMG 2.1 CompactPCI Hot Swap Specification R2.0 Compliant
- Design for 6U CompactPCI chassis with 12 I/O slots for 3U cPCI,
which utilizes 6U dual bridge system board as host controller
- One system slot with maximum 14 I/O slots for 3U cPCI, system
on right hand side
- One slot could be customized to be empty for the space of partition
frame in chassis
- P3 and P5 on system slot are configured for rear I/O
- One utility I/O slot (at the right side of system slot) for
front accessible storage devices expansion
- FDD, IDE1 and IDE2 interface on the rear side for directly connecting
storage devices. Pin assignments are suitable for cPCI-6760D series
(FDD and IDE1 go through J3/P3, IDE2 goes through J5/P5)
- Separate chassis ground and signal ground on backplane
- 10-layer PCB for accuracy impedance control and electronic noise
immunity
- Backplane V(I/O) selectable for 5V or 3.3V, default is 5V
- On board connectors for DC voltage LEDs, power on/off switch
and reset button
- Three ATX sockets with screw terminals for +5V, +3.3V, +12V
and -12V DC input
- 40TE/HP (10-slot) width
|
| More Info |
|
|
|
|
|
|
|
|
|
|
