BRK25M-R-FT
BRK25M-R-FT Image
This image is representative of the product and may not be the exact image of this product.
Model: BRK25M-R-FT
Manufacturer: Winford Engineering
DB25 Male Breakout Board, R/A Connector, Feet
Product Status: Active - Active products are produced on a regular manufacturing schedule and are actively supported products. Active products are not necessarily in stock in the USA. Lead time to ship date for Active products is typically stock to 15 business days ARO.

Stock Status: Call

Get Quote ->

These breakout boards bring all 25 pins of a DB25 connector out to screw terminal blocks for easy connection and prototyping work. They are available with both male and female connectors. The BRK25M has a male connector and the BRK25F has a female connector. Each pin is also brought to solder pads (4 per pin) at 0.1" spacing, allowing easy addition of standard pin headers. These break out boards are perfect for experimentation and prototype work, as well as for use in the educational laboratory. These boards are useful in working with National Instruments data aquisition cards, CNC equipment, and any other device that utilizes a DB25 connector. A breakout board is sometimes referred to as a "transition module", "terminal board", or "interface module". The BRK25M (male connector) includes a few features for use with our ETH32 and CRD155B I/O devices. First, the 25 pins are grouped into three groups of screw terminals, with pin 25 (ground) being split out to all three groups. Each group consists of 8 data lines (an entire I/O port) and a ground line. The groups are labeled A, B, and C. These correspond to the three I/O ports on the CRD155B and, when connected to Connector A of the ETH32, Ports 0, 1, and 2 of the ETH32. Each group of screw terminals has its own ground terminal. All the ground terminals are tied together on the breakout board and are connected to pin 25 of the DB-25 connector.

Features

  • Perfect for prototyping serial port and parallel port circuits
  • Screw terminal for each data line
  • Screw terminals accomodate wire sizes from 16AWG to 26AWG
  • Solder connection holes, four (4) per data line
  • Supports addition of .1" pin headers
  • Approximate dimensions: 2.38" x 4.5"
  • Rubber feet or