This breakout board brings all 10 pins of its male dual row header out to screw terminal blocks for easy connection and prototyping work. Each pin is also brought to solder pads (4 per pin) at 0.1" spacing, allowing easy addition of 0.1" pin headers. This break out board is perfect for experimentation and prototype work, as well as for use in the educational laboratory. It is well-suited for interfacing with microcontroller programming circuits, I/O ports, DAQ equipment, and any other device that uses a 2x5 10-position header connector. Breakout boards are available with two different styles of headers: A shrouded "box" header with no ejectors, and a header with long ejector latches. "Long ejectors" indicates that the ejectors are the correct length to accomodate IDC connectors with strain reliefs installed. A dual row header is sometimes referred to as an "IDC Header", "IDC connector", or "ribbon cable connector". A breakout board is sometimes referred to as a "transition module", "terminal board", or "interface module".

Features

• 2 x 5 0.1" spaced male pin header
• Screw terminal for each data line
• Screw terminals accomodate wire sizes from 16AWG to 26AWG
• Solder connection holes, four (4) per pin
• Supports addition of .1" pin headers
• Approximate dimensions: 2.38" x 2.5"
• DIN rail mount