This breakout board brings all 4 pins of its 4P4C modular jack out to screw terminal blocks for easy connection and prototyping work. Each pin is also brought to solder pads (5 per line) at 0.1" spacing, allowing easy addition of standard pin headers. This break out board is perfect for experimentation and prototype work, as well as for use in the educational laboratory. It is well-suited for work with serial ports, data acquisition equipment, telephone equipment, and any other device that uses a 4P4C connector. A breakout board is sometimes referred to as a "transition module", "terminal board", or "interface module". The 4P4C designation on the modular jack stands for 4-Position, 4-Conductor. On a telephone, the 4P4C connector is used for the handset.

Features

• 4P4C Jack (handset jack)
• Perfect for prototyping circuits
• Screw terminal for each data line
• Screw terminals accomodate wire sizes from 16AWG to 26AWG
• Solder connection holes, five (5) per line
• Supports addition of .1" pin headers
• Approximate dimensions: 2.38" x 1.6"
• Rubber feet or