 | | | |
|
|
|
| | |
|
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: DIO-24 |
| Manufacturer: ICP DAS | | 24 BIT OPTO-22 Digital I/O Board |
| Product Status: Active - Active products are produced on a regular manufacturing schedule and are actively supported products. Active products are not necessarily in stock in the USA. Lead time to ship date for Active products is typically stock to 15 business days ARO. Stock Status: Call |
|
| Price: $76.89 |
|
|
|
| The DIO-24 Provides 24 TTL digital I/O lines. The DIO-24 emulates 8255 mode 0 and has a increased output current of 15 mA (source) and 64 mA (sink) , allowing it to control LED, relay, etc. The DIO-24 consists of eighteen 8 bit bi-directional ports and 2 input lines for interrupt enable and interrupt. The 8 bit port are named port A(PA),port B(PB) ,port C(PC). The port C can be split into two four bit. All port are configured as inputs upon power-up or reset. The DIO-24 use 2 I/O address. The base address is selectable from 200 to 3FF hex. The interrupt signal can be connected to any of the interrupt levels 2 through 7 .
Features:
- DIO-24 :. 24 digital I/O lines
- Emulate 8255 mode 0 (Basic Input / Output mode)
- Buffer output for higher driving capability than 8255
- Register compatible to 724 series
- Programmable interrupt handling
- DIO-144 : Six 50-pin Header
- Output status readback
|
|
|
|
|
|
|
|
