| | | |
|
| | |
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: SI-1N |
Manufacturer: Abit | Server Motherboard w/ Intel® Pentium® 4, Dual Gigabit LANs, Five-Channel IDE
|
Product Status: Special Order - Special Order, Non-Cancellable / Non-Returnable (NCNR)- may be subject to extended lead time and / or minimum order. Stock Status: Call |
|
Get Quote -> |
|
|
|
With the implementation of total 5-channel IDE interfaces and two gigabit Ethernet LAN ports, the SI-1N motherboard is built for performance conscious storage appliance servers. The SI-1N motherboard not only features Intel's new generation micro-architecture technologies such as Rapid Execution Engine and higher clock speed but also provides RAID function for enhanced data protection. In addition, the DOM connection and internal I/O connection supports can further facilitate more versatile and sophisticated storage appliance designs.
Features
Processor
- Supports single Socket 478 for IntelR Pentium 4 processor of up to 2.8GHz and faster with a 512KB L2 cache and 400MHz system bus
Chipset
- Intel® 845GL Chipset Memory Controller Hub (MCH) with integrated Intel® Extreme Graphics support
- Intel® 82801DB I/O Controller Hub (ICH4)
- HighPoint HPT374 4-channel Ultra DMA/ATA133 RAID Controller
System Memory
- Two 184-pin DIMM sockets for non ECC, un-buffered memory module
- Supports up to 2GB DDR200/266 low profile memory capacity
Networking
- On board Broadcom BCM5702 Gigabit LAN controller with fail over, load-sharing, load-balancing capability
- Supports TCP/UDP checksum off-loading Wake-On-LAN functionalities
- Supports dual Gigabit Ethernet Ports
Graphics
- Integrated support by Intel® 845GL chipset
PCI Expansion Slot
- One 32-bit/33MHz PCI expansion slot for Riser card (optional)
- Supports both 3.3V and 5V PCI cards
Host I/O Interface
- One channel Ultra 33/66/100 IDE interface
- Four channel ATA/133 interface with RAID 0,1,0+1 support
Internal I/O Connections
- One USB pin header, each supports two USB device connections
- One VGA pin header
- Two COM port pin headers for COM1 and COM2 connections
- One Parallel port pin header
- Disk-On-Module (DOM) connection support
External Accessible I/O
- Two USB external connectors
- Two RJ-45 LAN connectors
- One VGA connector
- One COM port connector (Option)
System BIOS
- Phoenix/Award Plug and Play BIOS
- 4M-bit Flash ROM
Hardware Monitoring
- Embedded WinbondR W83627 hardware monitor ASIC
- Three sets of thermal sensors for systems and three fan speed sensors
- WinbondR Hardware Doctor™ Utility
Form Factor
- Micro ATX, 10.6"x 9.6"
- ATX 12V PSU
|
|
|
|
|
|
|