 | | | |
|
|
|
| | |
|
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: ADS3GX4R5 |
| Manufacturer: Addonics | | SATA II PCI-X RAID5/JBOD controller |
| Product Status: Active - Active products are produced on a regular manufacturing schedule and are actively supported products. Active products are not necessarily in stock in the USA. Lead time to ship date for Active products is typically stock to 15 business days ARO. Stock Status: Call |
|
| Get Quote -> |
|
|
|
| The Addonics SATA II PCI-X family of controllers are one of the fastest SATA controllers in the market. Incorporating the latest SATA II ASIC from Silicon Image, the controller is designed to work with fast PCI-X BUS to ensure maximum data throughput of 3 Gbits/sec per port. The standard RAID controller allow 4 SATA/ SATA II hard drives to be configured as RAID 1, RAID 0, RAID 1+0, RAID 1+S or as 4 individual drives. Whereas the RAID5/JBOD controller supports configuration of RAID 1, RAID 0, RAID 1+0, RAID5 and JBOD that combine all drives into one large volume.
With 4 drive are stripped together (configured as RAID 0), throughput up to 200 Mbytes/sec can be achieved using standard 7,000 RPM SATA hard drive (see benchmark test result below). Together with the Addonics optional Disk Array 4SA or 3SA system, you can add high performance storage system rivaling the traditional SCSI storage at less than half of the cost.
Features
- SATA II compliant
- Fits standard Desktop case and low profile systems
- PCI-X and PCI BUS compatible
- Up to 300 Mbytes/sec (3 Gbits/sec) per port
- 4 Internal Serial ATA ports
- Work with any Serial ATA drive
- Support large hard drives of 137 GB or greater
- RAID controller (ADSA3GX4R) configuration possibilities
- non-RAID - individual drive letter
- RAID 0, RAID 1, RAID 1+0, RAID 1+ S support
- RAID5/JBOD controller (ADS3GX4R5) configuration possibilities
- RAID 0, RAID1, RAID 1+0, RAID5
- JBOD - combines individual drive into one large volume to show as one drive letter
- Port Multiplier compatible (only on model ADS3GX4R5)
- Silicon Image chip set SiI 3124
- Hot swap - device can be removed and added without system shut down or restart
- simple plug and play
- compatible with Windows NT, 98SE, Me, 2000, XP, 2003, Vista, Linux (2.4 kernel or higher)
- 64-bit Linux RAID Driver for Redhat Fedora Core2 (rev.10037) for AMD64 and EMT64 platforms-Beta,
- 64-bit SuSE Linux Enterprise Server (SLES) 9.0RAID Driver (rev.10037) for AMD64 and EMT64 platforms-Beta
|
|
|
|
|
|
|
|
