| | | |
|
| | |
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: EP-8HDA5+ |
Manufacturer: Epox | VIA K8T800+8237 Socket 754 with Dual LAN
|
Product Status: Discontinued - This product is no longer in production. This page is maintained for informational purposes only. Stock Status: Not Available |
|
|
|
|
Specifications
- CPU Socket:
Support Socket-754 based AMD Athlon-64 1.6GTs Hyper Transport processors with up to 3200+
- System Memory:
Three 184-pin DDR SDRAM DIMM sockets
Support single or double sided 2.5v DDR-266/333/400 DIMMs architecture in 128/256/512Mb technologies
Support up to 3 GB system memory.
The DDR400 only support two maximum unbuffered DIMMs and not available on registered DIMMs.
- Chipset:
VIA K8T800 + VT8237 AGPset
- Expansion Slots:
Five PCI connectors compliant with PCI v2.2
One 1.5v AGP- 8X/4X connector compliant with AGP v3.0
- USB:
Eight USB connectors compliant with USB2.0 from embedded USB controller (4 connectors at rear panel)
- P-ATA IDE:
Two IDE ports (up to 4 IDE devices) with UDMA-33, ATA-66/100/133 support from embedded IDE controller
- S-ATA RAID:
Two S-ATA ports from VT8237 with up to 150MBps bandwidth
Four S-ATA ports from Silicon Image Sil-3114 with up to 150MBps bandwidth and RAID 0, 1, 10, 5 support for mass storage fault tolerance (EP-8HDA5+ only)
- LAN:
One RJ45 from onboard VIA VT6103 10/100Mb Fast Ethernet PHY. (EP-8HDA5+ only)
2nd RJ45 from onboard Marvell 88E8001 Gb Ethernet controller with Auto MDI/MDIX and Virtual Cable Net-Diagnostic support.
- Audio:
Selectable 2, 6 or 8-CH audio from onboard RealTek ALC850 AC'97 v2.3 compliant CODEC with 18-bit ADC and 16-bit DAC resolution
Support Aux-In, CD-In, S/PDIF-in and S/PDIF-out
Support Front panel audio for Mic-In and stereo Line-out only. (Front panel Line-out electrically shared with rear panel Line-out)
Support Stereo Mic-In for better audio quality input
Support Auto Jack Sensing for fool-proof audio device installation
- I/O:
Onboard Winbond W83687THF LPC I/O controller
Legacy peripheral interface for PS/2 keyboard & mouse, FDD, Parallel, Two Serial, Game and IrDA (v1.0 compliant), ¡K
Support Hardware Monitoring function such as fan speed monitoring and CPU temperature sensing.
- BIOS:
4Mb Flash EEPROM with Award Plug&Play BIOS
Support ACPI S3 (Suspend To RAM) mode in ACPI compliant O/S
Support EZ Boot for fast bootable device selection
Support Magic Health for system hardware status report during system boot-up
- Special Features:
Support KBPO (Keyboard Power ON) function
Support Wake-On-LAN by PME
Support USB resume in S3
Onboard Post-Port LED display
Support AGP-Master for protection against improper AGP card insertion
Support Cool"n"Quiet function
Power BIOS for excellent over clocking features:
Support Asynchronous FSB/DIMM timing mode
1MHz fine tuning on AGP clock
Support BIOS adjustable CPU clock and voltage, AGP voltage, DIMM frequency and voltage settings.
- Powerful utilities for Windows:
USDM (Unified System Diagnostic Manager) for system hardware monitoring
Magic Flash for BIOS update without requiring DOS flash utility and bootable diskette
Magic Screen for personal bootup screen design
- Useful software bundle:
Symantec Ghost, Norton Personal Firewall and Trend PC-Cillin for system backup and security
- Form Factor:
305mm x 245mm x 40mm, ATX Size
- Accessories:
User's manuals for Main board, Multilingual Jumper Setting,
S-ATA RAID Floppy diskette for Silicon Image RAID and VIA RAID
CD for drivers, utilities and bundle software
Two P-ATA Round Cables (EP-8HDA5+ only),
One Floppy Cable, Two S-ATA Cable sets.
S-ATA Bracket with Game port, IO shield.
|
|
|
|
|
|