 | | | |
|
|
|
| | |
|
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: AEI-1200C |
| Manufacturer: Aei | | PCI-X Dual Port 10/100/1000 Gigabit Ethernet NIC |
| Product Status: Discontinued - This product is no longer in production. This page is maintained for informational purposes only. Stock Status: Not Available |
| Recommended replacement: AEI-1400C |
| |
|
|
| The AEI-1200C supports and auto-negotiates between 32/64-bit, and 33/66/100/133 MHz data paths. Built with PCI-X technology, the AEI-1200C supports standard PCI 2.1 and 2.2 specifications, and also PCI-X motherboards for clock speeds into the 133 MHz range. It is uniquely designed with integrated magnetics, low profile surface mount resistors and capacitors, high precision oscillator, and other high-end discrete components. The result is a card that is highly reliable, resistant to damage, fault tolerant, and performance that is unparalleled. The AEI-1200C is fully interoperable with existing Fast Ethernet or Gigabit Ethernet hubs, switches and routers.
The AEI-1200C supports PCI Hot-plug for IBM, Compaq, Dell and Microsoft platforms
Features
- Ten times the throughput of standard Fast Ethernet cards.
- Nway auto negotiation / automatic sensing and switching between 10 Mbps / 100 Mbps/ 1000Mbps AND half or full duplex operation.
- Boot ROM programmable
- Easy to install and configure.
- Half or Full Duplex operation.
- Three speed 10Mbps (10Base-T), 100 Mbps (100Base-Tx), or 1000 Mbps (1000Base-T)
- Cross Platform support for a broad range of operating systems and architectures.
- DMA Bus Mastering for lower CPU utilization.
Specifications
- Connector: Dual RJ-45(f)
- IEEE Standards
- IEEE 802.3 (10Base-T Ethernet)
- IEEE 802.3u (100Base-Tx Ethernet)
- IEEE 802.3ab (1000Base-T Ethernet)
- IEEE 802.3ad (Port Aggregation)
- 802.1Q (VLAN)
- 802.1x (Flow Control)
- 802.1p (Layer 2 Priority Encoding QoS)
- 802.1z
- Fast EtherChannel (FEC) and Gigabit EtherChannel (GEC) supported.
- PacketEngine Network Management Software: Provided at nominal expense!
- Speeds, Cable & Distance:
- Ethernet, 10Base-T (Cat 3, 4, 5 UTP)
- Fast Ethernet, 100Base-Tx (Cat 5 UTP )
- Gigabit Ethernet, 1000Base-T (Cat 5, Cat 5e, Cat 6, and DataTwist 600e)
- Distance up to 100 meters maximum
- For Gigabit transmissions, recommend use of Belden Cable's DataTwist 600e.
- Duplex: Half or Full Duplex operation capable.
- Auto-negotiation / NWay: Auto-negotiation between Full duplex and simplex operations AND between 10 Mbps, 100 Mbps, and 1000 Mbps.
- Data transfer Mode: DMA Bus Mastering
- LEDs:
- Activity/Link:
- Link: Turns on
- Activity: Blinks
- 100Mbits/s
- 1000Mbit/s
- Slot Type:
- PCI v2.2 32/64 bit, 33/66Mhz
- PCI-X v1.0 32/64-bit, 66/100/133MHz
- 3.3V or 5V slot
- Interrupt Levels: INTA, INTB, INTC, INTD
- Bus Type: PCI-X 1.0 compliant, backwards compatible to PCI 2.1 & 2.2
- Driver Support:
- ODI, NDIS, Packet driver for various network operating systems including:
LANtastic, LAN Server, NetWare, OS/2, Windows and Linux.
- Windows 98 SE, ME
- Windows 2000, XP, Server 2003
- Windows NT 4.0 & Terminal Server
- Windows NT Embedded 4.0
- Windows XP Embedded
- Solaris 2.7 and higher (x86)
- Linux 2.2.x and 2.4.x kernel
- DOS, OS/2, ODI
- Novel NetWare 4.11 and higher
- UnixWare 7.x and OpenUNIX 8
- FreeBSD 4.5 kernel
- VxWorks Tornado Rev. x.x
- Certifications:
- FCC Part 15, Subpart B
- CE EN 55022: 1998 Class A
- CE EN 55024: 1998
- CE EN 61000-3-2 2000
- CE EN 61000-3-3
- CE EIC 6100-4-3 1995
- CE EIC 6100-4-4 1995
- CE EIC 6100-4-5 1995
- CE EIC 6100-4-6 1996
- CE EIC 6100-4-11 199
- Environment Specs:
- OperatingTemperature: 0C to 50C
- Humidity: 0 to 90% non-condensing
- Dimensions: 6.9" (L) x 4.2" (H) Universal Short Card
- Power Consumption:
- Operating Voltage: 3.3VDC/5VDC
- Consumption: 1.6W
|
|
|
|
|
|
