| | | |
|
| | |
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: HGS2108 |
Manufacturer: Danpex | L2, 8 ports 10/100/1000Mbps Copper SNMP Desk top switch with 2 SFP slot |
Product Status: Discontinued - This product is no longer in production. This page is maintained for informational purposes only. Stock Status: Not Available |
Recommended replacement: GS2208B |
|
|
|
Features
- 6 (10/100/1000Mbps) Gigabit Ethernet (TP) switching ports are compliant with IEEE 802.3, 802.3u, and 802.3ab.
- 2 Gigabit TP/SFP fiber are dual media ports with auto detected function.
- Supports auto-negotiation for configuring speed and duplex-mode.
- Supports 802.3x flow control for full-duplex ports.
- Supports collision-based and carrier-based backpressure for half-duplex ports.
- Any ports can be in disable mode, force mode or auto-polling mode.
- Supports Head of Line (HOL) blocking prevention.
- Supports broadcast storm filtering.
- Auto-aging with programmable inter-age time.
- Supports 802.1p Class of Service (CoS) with 2-level priority queuing.
- Supports port sniffer function.
- Programmable maximum Ethernet frame size of 1518, 1532, or 9208 bytes (jumbo frame.)
- Supports port-based VLAN, 802.1Q tag-based VLAN.
- Efficient self-learning and address recognition mechanism enables forwarding rate at wire speed.
- Web-based management provides the ability to completely manage the switch from web browser.
- SNMP/Telnet interface delivers complete in-band management.
- Supports IEEE 802.1d Spanning Tree Protocol (STP).
- Supports IEEE 802.1w Rapid Spanning Tree Protocol (RSTP).
- Supports IEEE 802.1X port-based network access control.
- Supports IP Multicasting to implement IGMP Snooping function.
- Supports IEEE 802.3ad port trunking with flexible load distribution and failover function.
- Supports ingress port security mode for VLAN Tagged and Untagged frame process.
- Supports SNMP MIB2 and RMON sampling with sampled packet error indication.
Technical Specifications
- Model: HGS2108
- Standards: IEEE 802.3 / 802.3ab / 802.3z / 802.3u / 802.3x
- Connectors / Slots:
- Front Panel
— Eight (8) 10/100/1000Mbps Gigabit Ethernet RJ-45 auto MDI/MDI-X (Ports 1 to 8)
— Two (2) SFP Slots 1000Mbps Gigabit Fiber modules
[ Note: Ports 7 and 8 RJ-45 connectors will be automatically disabled once SFP modules have been installed. Then, the SFP modules will become Ports 7 and 8! ]
- Rear Panel
— One (1) RS-232 DB-9 Male Console Port
[ Setting: Baud Rate=57600, Data Bits=8, Stop Bits=1, Parity=N, Flow Control=none ]
Add-On Modules (Sold Separately):
- GLCS00 - 1000Base-SX Multi-Mode SFP Duplex-LC, 850nm
- GLCL10 - 1000Base-LX Single-Mode 10km SFP Duplex-LC, 1310nm
- GLCL30 - 1000Base-LX Single-Mode 30km SFP Duplex-LC, 1550nm
Data Transfer Rate: 10/100/1000 Mbps (auto-negotiation or forced-mode selectable by software) for TP, and 1000 Mbps for Fiber
Cable/Max Distance:
- 1000Base-SX - 50/125 or 62.5/125µm Multi-Mode fiber, RUNNING SPEED (Mbps) - 1000, MAX. DISTANCE - 220 m
- 1000Base-LX - 9/125µm Single-Mode fiber, RUNNING SPEED (Mbps) - 1000, MAX. DISTANCE - 10~30 km 1
- 1000Base-T - Category 5e or above Unshielded Twisted-Pair (UTP), RUNNING SPEED (Mbps) - 1000, MAX. DISTANCE - 100 m
- 100Base-TX - Category 5 or above UTP, RUNNING SPEED (Mbps) - 100, MAX. DISTANCE - 100 m
- 10Base-T - Category 3 or above UTP, RUNNING SPEED (Mbps) - 10, MAX. DISTANCE - 100 m
Duplex Mode: Full for 1000Base-SX/LX/T, and Full/Half (auto-sense or forced-mode selectable by software) for 10/100Base-TX
MAC Address and Self-learning: 8 K MAC address and 4 K VLAN table entries
Buffer Memory: Embedded 144 KB frame buffer
Flow Control:
- IEEE 802.3x compliant for Full-duplex
- Backpressure flow control for Half-duplex
LEDs:
- Per Unit — Power, CPU
- Per TP Port — Link/ACT, 10/100/1000
- Per SFP Port — SFP(Link/ACT)
Power Requirement: 100~240V AC, 50/60Hz, 13W consumption
Operating Temperature: 0° to 50° C
Humidity: 5% to 90% (non-condensing)
Dimension: 44 x 220 x 130.5 mm (H x W x D), 19" rack-mountable with optional brackets
EMI Rating: FCC Part 15 Class A, CE Mark Approval
|
|
|
|
|
|