| | | |
|
| | |
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: GLCS00 |
Manufacturer: Danpex | 2 SFP Slots w/ 24-Port 10/100/1000Base-T (max. 24 Ports)
Web-based Switch |
Product Status: Discontinued - This product is no longer in production. This page is maintained for informational purposes only. Stock Status: Not Available |
|
|
|
|
Features
- Standards: IEEE 802.3 / 802.3ab / 802.3z / 802.3u / 802.3x
- Connectors / Slots:
- Front Panel
- Twenty-four (24) 10/100/1000Mbps Gigabit Ethernet RJ-45 auto MDI/MDI-X (Ports 1 to 24)
- Two (2) SFP Slots 1000Mbps Gigabit Fiber modules
[ Note: Ports 23 and 24 RJ-45 connectors will be automatically disabled once SFP modules have been installed. Then, the fiber ports will become Ports 23 and 24! ]
- Rear Panel — None
- Add-On Modules (Sold Separately):
- GLCS00 1000Base-SX Multi-Mode SFP Duplex-LC, 850nm
- GLCL10 1000Base-LX Single-Mode 10km SFP Duplex-LC, 1310nm
- GLCL30 1000Base-LX Single-Mode 30km SFP Duplex-LC, 1550nm
- Data Transfer Rate: 10/100/1000 Mbps (auto-negotiation or forced-mode selectable by software) for TP, and 1000 Mbps for Fiber
- Duplex Mode:
- Full for 1000Base-SX/LX
- Full/Half (auto-sense or forced-mode selectable by software) for 10/100/1000Base-T
- MAC Address and Self-learning: 8 K MAC address and 4 K VLAN table entries
- Buffer Memory: Embedded 400 KB frame buffer
- LEDs:
- Per Unit — Power
- Per TP Port — Link/ACT, 10/100/1000
- Per SFP Port — Link/ACT
- Power Requirement: 100~240V AC, 50/60Hz, 30W consumption
- Operating Temperature: 0 to 50 C
- Humidity: 5% to 90% (non-condensing)
- Dimension: 44 x 442 x 209 mm (H x W x D), 19" rack-mountable with brackets
- EMI Rating: FCC Class A, CE Mark
|
| More Info |
|
|
|
|
|
|
|