 | | | |
|
|
|
| | |
|
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: ACE-716C |
| Manufacturer: IEI | | 150W+24VDC Power Supply |
| Product Status: Discontinued - This product is no longer in production. This page is maintained for informational purposes only. Stock Status: Not Available |
| Recommended replacement: ACE-716C-RS |
| |
|
|
Input Table :
|
Model |
Input Range |
Input Current |
|
ACE-716A / 716AP |
85 ~ 135V AC or
180 ~ 265V AC, 47 ~ 440Hz |
4A@115V AC or
2A@230V AC |
|
ACE-716T |
-36 ~ -72V DC |
6A@-48V DC |
|
ACE-716C |
+19 ~ +30V DC |
12A@+24V DC |
- Output Table ( at 50oC ) :
|
Model |
Rated Load |
Max. Output |
|
+5V |
+12V |
-5V |
-12V |
+5V |
+12V |
-5V |
-12V |
|
ACE-716A/716AP |
18A |
4A |
0.5A |
1A |
25A |
10A |
1A |
1A |
|
ACE-716T |
18A |
4A |
0.5A |
1A |
25A |
10A |
1A |
1.5A |
|
ACE-716C |
18A |
4A |
0.5A |
1A |
25A |
10A |
1A |
1.5A |
- Inrush Current (
ACE-716A / 716AP ) : Not exceed 15A@115V AC or 30A @230V AC
- Ripple and Noise :
Less than 100mV
- Line Regulation :
The line regulation for each outputs are less than +/-1%, while measuring at rated loading and +/-10% of input voltage changing
- Load Regulation :
--> ACE-716A / 716AP : Less than +/-3%@+/-5V and -12V, +/-6%@+12V
--> ACE-716T/C : Less than +/-1%@+/-5V and -12V, +/-4%+12V
- Efficiency :
--> ACE-716A / 716AP : Higher than 75%
--> ACE-716T/C : Higher than 70%
- Hold-up Time (
ACE-716A/716AP ) : 20ms (typical)@115V AC
- Altitude :
0 ~ 10,000ft
- Protection :
Over voltage protection. The trip point is around 5.9V ~ 7.0V output
- Thermal Protection :
Built in 110+/-5oC thermal switch in HS1
- Vibration :
10 ~ 55Hz at 2G 3min. period, 30min. along X, Y and Z axis
- Impact :
10G for 20ms once on each X, Y and Z axis
- Hi-port isolation :
--> 4300V DC, input to output for one minute
--> 2200V DC, input to ground for one minute
- MTBF :
--> ACE-716A : 188,800 Hours
--> ACE-716T : 212,050 Hours
--> ACE-716C : 187,490 Hours
- Safety :
Meets UL 478, 1012, 1950; CSA 22.2 No. 234, VDE EN60 950
- EMI :
--> Meets FCC docket 20780 curve "A", EN50081-2 : CISPR22 "A"
--> Harmonic EN 61000-3-2 for ACE-716AP
- EMS Standard ( Design to meet the following limits ) :
--> EN 50082-2
--> IEC 801-1 8KV (Air Discharge ) criteria B ( ACE-716A/716AP )
--> IEC 801-3, 10V/M criteria A
--> IEC 801-4, 2KV criteria B ( ACE-716A/716AP )
--> IEC 801-5, 2KV criteria B ( ACE-716A/716AP )
- Built-in ball bearing cooling fan
- Operating Temperature :
-20o ~ 70oC ( Derating curve will occur 50o ~ 70oC)
- Storage Temperature :
-20o ~ 85oC
- Dimensions :
97(W) x 40.5(H) x 198(D)mm; ( 3.8" x 1.6" x 7.8" )
|
| More Info |
|
|
|
|
|
|
|
|
|
