 | | | |
|
|
|
| | |
|
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: cPCIS-6125SP |
| Manufacturer: Adlink technology | | Turn-key Starting Platform Constructed of cPCIS-6400X with cPCI-
6760D/P5,128MB RAM and 10GB 2.5"ATA HDD with PMC-8670. |
| Product Status: Discontinued - This product is no longer in production. This page is maintained for informational purposes only. Stock Status: Not Available |
|
| |
|
|
|
The cPCIS-6125 is specially designed for high end compact
size network equipment applications.The system is 1U
height to accommodate an industry standard 6U
CompactPCI system up to 2 slots (one system with 1
peripheral I/O slots.)Best space arrangement provides the
housing of all boards with cooling fans and 200W power
supply integrated in only 24 cm depth chassis.Non-
blocked ventilation design with both suck-in and blow-out
fans provides the best system cooling efficiency.Built-in
high quality backplane cBP-6402 provides the 64-bit cPCI
bus running at 66MHz speed with best impedance control
and full range compatibility.The combination with cPCI-
6780V or cPCI-6760D provides 6U CompactPCI computer
platform with 1.26GHz Tualatin or low power Pentium-III up
to 850MHz solution.The concept of cPCIS-6125 series
design makes it as an ideal computer platform for demand-
ing Networking,Slim Server,VPN,Firewall,VoIP Gateway,
Computer Telephony Integration applications.
Features
- 19-inch rack mounted or benchtop design,1U height for
6U CompactPCI boards,only 24 cm in depth
- Suitable for one dual-space system module or one
single-space system board with one expansion board
- 64-bit cPCI bus backplane with multiple I/O on rear side
- Equipped with industrial grade 200W ATX power supply
- Four cooling fans for boards,two for suck-in and two for
blow-out air flow,provides non-blocked ventilation for
high efficient system cooling
- Guarded power switch and reset button
- Front removable filter for easy maintenance
- Keyboard,mouse and COM1 can directly access via
rear panel
- Floppy and IDE1 interface on the rear side of backplane,
easy for floppy or ATAPI CD-ROM connection during
system installation
- PICMG 2.0 CompactPCI Specification R3.0 Compliant
- PICMG 2.1 CompactPCI Hot Swappable Specification
R2.0 Compliant
|
|
|
|
|
|
