Features

• Standards: IEEE 802.3u 100Base-FX/TX, IEEE 802.3 10Base-T, IEEE 802.3x
• Connectors / Slot: Front Panel
• 24 RJ-45 jacks (auto MDI/MDI-X selection)
• One (1) module slot for 100Base-FX fiber [ If a fiber module has been installed, the RJ-45 jack at Port # 24 will be automatically disabled. ]
• One (1) RJ-45 RS-232 Console Port (included a "RJ-45 to DB-9 Female" adapter) [ Console Port Settings: BitRate=19200, DataBit=8, Parity=None, StopBit=1, FlowControl=None ]
• Data Transfer Rate: 10/100 Mbps (auto-negotiation), 100 Mbps for fiber module
• Duplex Mode: Full/Half (auto-sense), Full only for fiber module
• MAC Address: 8 K
• Buffer Memory: 2.5 M bits per device
• Bandwidth Control:
• Per port Transmit (Tx) and/or Receive (Rx) Bandwidth Control
• Selectable from: 128K / 256K / 512K / 1M / 2M / 4M / 8M
• VLAN: Port-based or Tag-based VLAN, up to 32 VLAN groups for Port-based VLAN
• Trunking: Up to 7 Trunk groups with load balance and fault tolerance
• Diagnostics: Trunk Link Warning and Network Loop Fault Port Detect
• Cable/Max Distance: Category 5 UTP for 100 Mbps, or Category 3/4/5 UTP for 10 Mbps, up to 100 m 50/125, 62.5/125, or 100/140µm multi-mode fiber, up to 2 km
• LEDs:
• System LED — PWR
• Per Port LED — Link/Act, FDX/COL, 100
• Power Requirements:
• Input — 90~264V AC, 47~63Hz
• Output — 3.3V/7A
• Consumption — 10W maximum
• Operating Temperature: 0° to 45° C
• Humidity: 10% to 90%
• Dimension: 44 x 435 x 149 mm (H x W x D), 19" rack-mountable with brackets
• EMI Rating: FCC Class A, CE Mark