JetCon 1301-s
JetCon 1301-s Image
This image is representative of the product and may not be the exact image of this product.
Model: JetCon 1301-s
Manufacturer: Korenix
Industrial Ethernet to Single Mode Fiber Rail Converter, 1 copper 1 fiber, compact size
Product Status: Discontinued - This product is no longer in production. This page is maintained for informational purposes only.

Stock Status: Not Available

 
Korenix JetCon1301 is a compact sized and rugged industrial fast Ethernet media converter, witch supports one 10/00TX Fast Ethernet copper and one Fast Ethernet fiber port and with wide power range either AC (18~27) or DC(18~32V), and wide operating temperature (-20~70¢FJ). The JetCon1301 also provides different operating features than before, like pure converter mode, switch mode, TP forced speed and Link Loose forwarding. With those features, it can guarantee the packet never to be lost and alarm the link event to the IT engineer immediately. Especially the pure converter mode, it will not check the packet format and just forward the signal to link partner when its setting is on pure converter mode and this operating mode is designed for special devices that use proprietary communication protocol. The JetCon1301 meets IEEE802.3 10Base-T, IEEE-802.3u 100Base-TX, IEEE802.3u 100Base-FX and IEEE802.1x flow control standards and is compatible with most of Ethernet devices. JetCon1301 delivers 2 types of mode for multi-mode and single-mode fiber. The single mode model can link partner to reach 30KM far and multi-mode 4KM via different type of optical fiber. For your network architecture, JetCon1301 is the best choice of all media converter with stability, inerrability, and convenience of networking.

Features

  • Slim-sized for Industrial Din-rail Application
  • Convert 10/100TX Port to FiberOptic Network
  • Support 10/100Base-TX Auto MDI/MDI-X and Auto Negotiation
  • Support Switch and pure-converter mode
  • Extreme low data forwarding latency
  • Link Loose Forwarding
  • 18~27VAC or 18~32VDC Power Input by 2-pin Terminal Block
  • IP 30 Case Protection
  • DIN-Rail Mount