| | | |
|
| | |
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: 5104S |
Manufacturer: Sealevel | PCI RS-232, RS-422, RS-485, RS-530, RS-530A, V.35 Synchronous Serial Interface |
Product Status: Discontinued - This product is no longer in production. This page is maintained for informational purposes only. Stock Status: Not Available |
|
|
|
|
The 5104S ACB-ULTRA.LPCI adapter was designed for seamless
integration into any PCI based system. The ACB-ULTRA.LPCI adapter requires a
PCI slot, one IRQ, an 8 byte block of I/O address and a 16K block or 256K block of
memory address and additionally, the IUSC requires a 256 byte block of memory.
The memory range of this adapter can be configured to reside in the lower 1
Megabyte memory only or anywhere in upper memory. Low memory (not available
on PCI 2.2 or higher systems) must to be configured as 16 X 16K blocks of page
memory. High memory can be configured as a 256K linear block or 16K paged
memory.
Features
- Single channel high speed sync/async wide area network (WAN) interface
- RS-232, RS-422/449, EIA-530, V.35 and RS-485 serial interface capability with versatile cabling options
- Multi-protocol capable including: PPP (point-to-point protocol), Frame Relay,X.25, high-speed Async, Bi-Sync, Mono-Sync, HDLC, SDLC, etc.
- Ideal for T1, Fractional T1, E1, and ISDN and other WAN applications
- On-board Z16C32 (IUSC) with built in DMA controller and 32 byte FIFO buffer
- Up to 10 Mbps burst mode
- 256K of on-board RAM
- Link list DMA supported
- 32-bit data path
- OEM Security feature available as an option
|
| More Info |
|
|
|
|
|
|
|