| | | |
|
| | |
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: RPQ-8910-08 |
Manufacturer: Rackpaq | 8 Bay IDE-RAID System - 8 200GB HDDs installed |
Product Status: Discontinued - This product is no longer in production. This page is maintained for informational purposes only. Stock Status: Not Available |
|
|
|
|
The RPQ-8910 is an intelligent Ultra DMA 100 drive ready RAID subsystem supplying fault tolerant data protection and 100% transparency to the host operating system
The RPQ-8910 is an intelligent Ultra DMA 100 drive ready RAID subsystem supplying fault tolerant data protection and 100% transparency to the host operating system. It is a full-featured RAID array supporting RAID levels 0, 1, 0+1, 3, and 5. The Otto di Oro series contains Ultra 160 SCSI host interface for higher data throughput rates. Available in either a 4U rackmount or a tower based chassis, it is the ideal storage solution for applications requiring high data throughput, availability, and flexibility in configur-ation.
Features |
Benefits |
Host Independent RAID controller with Ultra 160 SCSI interface to the host. |
Transparent to the Server and the OS.
No need to worry about the driver issue. The Server/OS will see it as if it is single big disk.
Perfect for any OS including Unix, BSD Unix, Linux, Netware, and Windows NT/2000/XP. |
8 Hot Swappable IDE Disk Bays |
Provides greater than 1 Terabyte of usable space with 160GB IDE disk in a RAID-5 Configuration.
Cost saving to have maximum capacity with low cost IDE disk drive. |
Dual Host Channels |
Configurable to hook up to two separate Servers for storage clustering applications.
Configurable to daisy chained with another OT- 8910 unit to increase the total capacity per Server. |
Full RAID functions
|
RAID 0, 1, 5, 0+1, Hot Spare & Hot Swap & Auto-Rebuild. |
Online Capacity/Volume Expansion |
Capable of adding newly inserted HDD's capacity into the last existing logical volume while online running other applications. |
Multiple Configuration Methods |
The unit can be configured and monitor through following methods:
1. LCD panel with button
2. RS-232 serial port hook up to a hyper terminal
3. Browser-based Java GUI management utility |
Technical Specifications
Models |
RPQ-8910A |
RPQ-8910AR |
|
Form-factor |
Tower |
4U Rackmount |
|
RAID processor |
Intel 80303 64 bit RISC |
RAID Level |
0, 1, 0+1, 3, 5, Hot-Spare |
Cache Memory |
64MB to 128MB |
No. of host channels (host+drive) |
2 + 8, Clustering ready |
Host bus interface |
Ultra 160 LVD SCSI |
Drive bus interface |
Ultra DMA100 IDE |
Data Transfer Rate |
Up to 160MB/Sec |
Back plane board |
Ultra DMA100 IDE |
Hot Swap drive tray |
8 each 1-inch trays |
Drive tray connectors |
Ultra DMA100 |
Hot-swappable power supplies |
2 x 300W |
Tagged Command Queuing |
Up to 255 commands |
Cooling fans
|
4 |
Support 160GB IDE Disk |
Yes |
Security lock
|
Yes |
Fax/Pager notification
|
Yes |
Password protection
|
Yes |
Audible alarm
|
Yes |
Failed drive indicators
|
Yes |
Failed drive auto rebuild
|
Yes |
On-line consistency check
|
Yes |
Hot standby drive
|
Yes |
Continuous rebuild
|
Yes |
Host independent |
Yes |
UPS connection
|
Yes |
Environment monitor (ENC)
|
Yes |
MTBF (hrs)
|
>500,000 |
GUI RAID management software |
Option |
Power requirements |
AC 115V/230V, 5/2.5A,50/60Hz |
Environmental Relative Humidity:
|
10ºC to 85º CNon-condensing |
Operating Temp:
|
10ºC to 50ºC |
Non-operating Temp:
|
40ºC to 60ºC |
Physical Dimension: |
430(H)*176(W)*449(D) mm
16.9(H)*6.9(W)*17.6(D) inches |
Weight |
17kgs/37.5lbs |
|
|
|
|
|
|