| | | |
|
| | |
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: AEP2100LST |
Manufacturer: Danpex | Ethernet adpater PCI 32Bit 10/100Mbps RJ-45 & 10Base FL ST combo card; Low Profile bracket
|
Product Status: Discontinued - This product is no longer in production. This page is maintained for informational purposes only. Stock Status: Not Available |
|
|
|
|
Features
- Model: AEP2100SC / AEP2100ST / AEP2100LSC / AEP2100LST
- Standards: IEEE 802.3u 100Base-TX, IEEE 802.3 10Base-FL/T
- Bus Architecture: 32-Bit PCI
- Connectors:
- AEP2100SC/LSC — Multi-Mode Duplex-SC, 850nm & RJ-45
- AEP2100ST/LST — Multi-Mode Duplex-ST, 850nm & RJ-45
* Note: Fiber port & TP port CANNOT BE USED SIMULTANEOUSLY,
i.e. use one connector at a time. Best way to switch between them is to
power down your system first, then select the desired connector.
- Data Transfer Rate: 10Mbps for FL, 10/100Mbps (auto-negotiation) for TX
- Duplex Mode: Full or Half for FL, Full or Half (auto-sense) for TX
- Cable / Max Distance:
- 50/125, 62.5/125µm Multi-Mode fiber, up to 2km
- Category 5 or up UTP cable for 100Mbps, up to 100m
- Category 3 or up UTP cable for 10Mbps, up to 100m
- LEDs: Link/ACT, FDX
- Power Requriement: 1A@+5V
- Operating Temperature: 0° to 50° C
- Humidity: 5% to 90%
- PCB Dimension: 63 x 148mm (H x W)
- Bracket:
- AEP2100SC/ST — Standard Profile bracket
- AEP2100LSC/LST — Low Profile bracket
- EMI Rating: FCC Class A, CE Mark
|
| More Info |
|
|
|
|
|
|
|