 | | | |
|
|
|
| | |
|
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: DIO-48 |
| Manufacturer: ICP DAS | | 48 BIT OPTO-22 Digital I/O Board |
| Product Status: Active - Active products are produced on a regular manufacturing schedule and are actively supported products. Active products are not necessarily in stock in the USA. Lead time to ship date for Active products is typically stock to 15 business days ARO. Stock Status: Call |
|
| Price: $122.39 |
|
|
|
| The DIO-48 provides 48 TTL digital I/O lines, and one 16 bit counter . The DIO-48 emulates 8255 mode 0 and has a increased output current of 15mA (source) and 64mA (sink) , allowing it to control LED, relay, etc. The DIO-48 consists of six 8 bit bi-directional ports and 3 input lines for interrupt enable and counter. The 8 bit port are named port A(PA),port B(PB) ,port C(PC). The port C can be split into two four bit. All ports are configured as inputs upon power-up or reset. The base address is selectable from 200 to 3FF hex. The interrupt signal can be connected to any of the interrupt levels 2 through 7.
Features
- Connects directly to DB-24P,DB-24R,DB-24PR,DB-885B ,or any OPTO-22 compatible daughter board
- 48 digital I/O lines
- One 16 bit counter
- IRQ Level : IRQ3 .. IRQ15
- Interrupt Trigger by Event / Timer / Port C3 , C7
- Clock Source can be setting : RTC (32.768K) / 2M / 4M / 8M Hz
- Emulate two industrial-standard 8255 mode 0
- Two 50-pin flat cable connector
- Output status read back
|
|
|
|
|
|
|
|
