 | | | |
|
|
|
| | |
|
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: I-7243D |
| Manufacturer: ICP DAS | | Modbus TCP Server / DeviceNet Master Gateway |
| Product Status: Active - Active products are produced on a regular manufacturing schedule and are actively supported products. Active products are not necessarily in stock in the USA. Lead time to ship date for Active products is typically stock to 15 business days ARO. Stock Status: Call |
|
| Get Quote -> |
|
|
|
| The I-7243D from ICP DAS is a solution that provides a communication protocol transfer the DeviceNet and Modbus/TCP protocol and solves a mission-critical problem: connecting an existing DeviceNet network to Ethernet-base PLCs and PC-based configuration and monitor system. it enables DeviceNet networks to be coupled together over the Internet/Ethernet, whereby remote monitoring and control is possible.
The I-7243D can be a DeviceNet master device in the CAN bus on the DeviceNet network. It is a “Predefined Master connection Set”, and supports Group 2 only Server functions to communication with slave devices. In addition, we also provide Utility software for users to configure their device parameters for the I-7243D. The following figure shows the application architecture for the I-7243D.
Features
- Programmable DeviceNet Master MAC ID.
- Programmable DeviceNet transfer-rate 125K, 250K, 500K.
- Supports maximum DeviceNet devices up to 63
- Predefined Master/Slave Connection Set
- The maximum Fragment number is (Input/Output) up to 64
- Supports I/O Operation Mode: Poll, Bit-Strobe and Change Of State/Cyclic
- Supports one Poll, one Bit-Strobe, one COS, one Cyclic IO connection for each DeviceNet device when connected with this module.
- Supports on-line adding device into and removing device from network.
- Supports boot-up auto communicate with slave devices.
- Converter single Mobbus/TCP to multi Modbus/RTU, setting by Utility
- Supports VxComm technique for every COM port of controller, set by Utility
- Allowed multi-client (or master) access simultaneously
|
| More Info |
|
|
|
|
|
|
|
|
|
|
