 | | | |
|
|
|
| | |
|
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: Step-200 |
| Manufacturer: ICP DAS | | Two axes stepping motor control card |
| Product Status: Active - Active products are produced on a regular manufacturing schedule and are actively supported products. Active products are not necessarily in stock in the USA. Lead time to ship date for Active products is typically stock to 15 business days ARO. Stock Status: Call |
|
| Price: $322.59 |
|
|
|
| The STEP-200 is a plug-in, 2-axis, command-based stepper motor controller board for the IBM PC/XT/AT and compatibles. It also can be used in pulse-type servo motor control (pulse input type). A 2Kbytes-FIFO is introduced as a command buffer. This buffer can provide 1360ms buffer time. Therefore the hardware architecture of STEP 200 is good for windows operation system. The STEP 200 will provide DOS, Windows 95 and Windows NT driver. It can offer real time motion control solution in windows system.
Features
- 2-axis independent, simultaneous stepper motor control / servo motor control ( pulse input type )
- Step rate : 1pps~250Kpps
- Max. step count : +/- steps
- DOS, windows 95, windows NT driver
- Embedded Micro-processor
- Command type interface
- linear, circular interpolation
- Acceleration / Deceleration : Automatic trapezoidal acceleration / deceleration
- Output pulse modes : CW/CCW or pulse / direction
- Output polarity can be programmable
- 2500Vrms optical isolated signal output
- 5 optical isolated digital inputs per axis for limit switches
- Pullups: All input have internal 10K pullups to + 5V
- Power Requirements: +5V mA typical , mA max
|
|
|
|
|
|
|
|
