| | | |
|
| | |
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: DK-6-2B |
Manufacturer: Cooldrives | Dual Bay 5.25" w/ Two Mobile Rack:
FireWire to IDE Enclosure (w/Master/Slave support up to 2X320GB IDE 3.5" Hard Drives)
|
Product Status: Discontinued - This product is no longer in production. This page is maintained for informational purposes only. Stock Status: Not Available |
|
|
|
|
Dual Bay (5.25 inch) w/ Two Mobile Rack
FireWire (IEEE-1394) to IDE using Oxford 911 based
DK-6-2B is ideally suited for tailgate interface applications for removable-hard disk drive. It allows IDE drives to be connected to a 1394 serial bus in a plug-and-play fashion.
Features:
- FireWire interface
- Transfer speeds up to 100/200/400 Mbps
- LBA 48 bit addressing - use any size hard drive(tested with WD200GB/250GB/Maxtor200GB/250GB/300GB/320GB)
- Plug and Play/Host Swapping capability
- No jumper pins or ID settings
- Provide two 5.25" Mobile Rack
- Support most types of IDE storage devices
- Two FireWire (IEEE 1394) 6pin Connector in the rear panel
- Built-in 80W power supply/Universal auto-switching 90-240V AC
- Built-in 80x80 mm cooling fan
- Low Profile Case (6.5 Tall X 7.2 WIDE X 13.1 Long)
- OS Requirements
- Windows 98 SE/ME/2000/XP A
pple FireWire driver set 2.3 or later
- Apple MacOS 9.1 or later Kit Includes:
- DK-6-2B enclosure
- AC Power Cord (2.0m length)
- 6pin-to-6pin FireWire cable (1.0m length)
- 2X Removable Trays
- 1-YEAR WARRANTY
|
|
|
|
|
|