| | | |
|
| | |
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: SBC-4202N |
Manufacturer: Aic | PICMG Socket-478 Pentium 4 CPU Card with SVGA,
Intel PRO/100+ LAN, DOC Socket and two USB 1.1 ports |
Product Status: Discontinued - This product is no longer in production. This page is maintained for informational purposes only. Stock Status: Not Available |
|
|
|
|
Features
Features
- Full-size PICMG Socket 478 Pentium 4 CPU Card
- Intel Brookdale Chipset with 82845 and 82801BA
- 3 GB PC133 SDRAM with ECC Support
- 4xAGP 3D SVGA with 32 MB Video Memory
- Optional Dual Intel PRO/100+ LAN
- Promise FastTrak/100 UltraATA/100 IDE RAID
- DiskOnChip Interface and ISA 64mA High Drive Capacity
Specifications
CPU |
Socket 478 Intel Pentium 4 processor up to 2.4GHz, 400MHz FSB |
Chipset |
Intel Brookdale Chipset with 82845 MCH and 82801BA ICH2 |
BIOS |
Award 2Mb PnP flash BIOS with APM / ACPI supported |
System Memory |
3 GB of SDRAM at 3 x 168-pin DIMM slots with ECC |
VGA Controller |
SiS 315 4xAGP SVGA accelerator with 256-/128-bit 3D/2D engine, Onboard 32 MB independent video memory, External DB15 connector on bracket |
Ethernet |
Dual Intel PRO/100+ Fast Ethernet Interface, 10 Base –T, 100 BaseTX, Auto Switching Fast Ethernet, Full Duplex, IEEE 802.3U Compliant Primary LAN (LAN1): Intel ICH2 with Intel 82562ET Secondary LAN (LAN2) :Intel 82559 |
Flash Memory Disk |
Reserved socket for DiskOnChip from M-System, support up to 576MB flash memory disk |
IDE Interface |
PCI Enhanced IDE interface with 2 channels support 4 ATAPI devices with UltraATA/100 (UltraDMA mode 5) |
Floppy Drive Interface |
1 FDD port, support up to 2 floppy devices |
IDE Raid |
Promise PDC20265R hardware PCI to UltraATA/100 IDE RAID controller, RAID Level 0 striping and level 1 mirroring, IDE3/4 dual UltraATA/100 IDE master interface |
Serial Port |
One RS-232C COM1 and one jumper selectable RS-232C/422/485 COM2, Both with 16C550 compatible UART and 16 bytes FIFO |
Parallel Port |
One bi-direction parallel port supports SPP/ECP/EPP mode |
Bus Interface |
PCI/ISA bus (PICMG 2.0) |
Universal Serial Bus |
(2) USB 1.1 ports |
IR Interface |
Support 1 IrDA header |
Keyboard Header |
5-pin header |
Keyboard / Mouse Connector |
6-pin Mini-Din PS/2 keyboard/ mouse connector |
RTC |
Internal RTC with Li battery |
Watchdog Timer |
16-level time-out intervals (by software program) |
Power Consumption |
+5V@1.8A, +12V@1.9A, -12V@ 0.1A |
Health Monitoring |
On-board hardware monitoring function |
Operating Temperature |
0oC ~ 60oC |
Storage Temperature |
-20oC ~ 70oC |
Humidity |
5% ~ 95% RH, non-condensing |
Dimensions |
338 x 122 mm (13.3" x 4.8") |
Net Weight |
450g (0.99pounds) |
|
| More Info |
|
|
|
|
|
|
|