 | | | |
|
|
|
| | |
|
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: PISO-DNM100-D |
| Manufacturer: ICP DAS | | 1 Port Intelligent DeviceNet Master Communication Board, 9 pin D-Sub Connector |
| Product Status: Active - Active products are produced on a regular manufacturing schedule and are actively supported products. Active products are not necessarily in stock in the USA. Lead time to ship date for Active products is typically stock to 15 business days ARO. Stock Status: Call |
|
| Get Quote -> |
|
|
|
| PISO-DNM100 can represent an economic solution of DeviceNet application and be a DeviceNet master device on the DeviceNet network. It is a "Predefined Master-Slave connection Set". PISO-DNM100 supports Group 2 only Server and UCMM functions to communication with slave devices. It has an independent CAN bus communication port and has the ability to cover a wide range of DeviceNet applications.
PISO-DNM100 uses the new CAN controller Phillips SJA1000T and transceiver 82C250/251, which provide bus arbitration, error detection with auto correction and re-transmission function.It can be installed on almost any windows-based system, for example Win98/Win2000/WinXP. It is popularly applied in the industrial automation, building automation, vehicle, marine, and embedded control network. In order to expand the DeviceNet functions of ICPDAS products, PISO-DNM100 is developed for this purpose
Features
- Microprocessor: 80186, 80Mhz.
- On board memory: 512K bytes SRAM, 512K bytes FLASH ROM
- CAN bus interface: ISO/IS 11898-2, Sub D9 connector or 5-pin screw terminal connector
- PCI interface with DPRAM memory mapping
- Select 120Ω terminator resistor for each port by jumper
- 33MHz 32bit 5V PCI bus(V2.1) plug and play mechanism
- CAN controller: Phillip SJA1000T
- CAN transceiver: Phillip 82C250/251
- Signal support: CAN_H, CAN_L
- 16 MHz CAN controller frequency
- Connector: 5-pin screw terminal connector or 9-pin D-sub connector
- 2500 Vrms isolation on CAN Interface
- EEPROM: 2K bytes
- NVRAM: 32 bytes
- Real Time Clock
- Built-in Dual-Watchdog protection
- 16-bit Timer
- STATUS LED, ERR LED
- Environmental:
- Operating temp: 0 ~ 60° C
- Storage temp: -20 ~ 80° C
- Humidity: 0 ~ 90% non-condensing
- Short PC plug-in card, Dimensions: 130mm X 110mm
|
| More Info |
|
|
|
|
|
|
|
|
|
|
|
