Cheetah-V
Cheetah-V Image
This image is representative of the product and may not be the exact image of this product.
Model: Cheetah-V
Manufacturer: Rackpaq
6U Pentium® M VMEbus Single Board Computer w/ 1.1 - 1.8 GHz Pentium M Processor, 1-2 Gbyte DDRAM, Many I/O and Storage Options
Product Status: Discontinued - This product is no longer in production. This page is maintained for informational purposes only.

Stock Status: Not Available

 
The Momentum Computer Cheetah-V is an Intel Pentium® M processor based VMEbus Single Board Computer, in a 6U form factor, operating at 1.1, 1.6 or 1.8 GHz core frequency with a 400 MHz front-side bus. The 1.8 GHz version features an on-chip 2 Mb L2 cache.
The Cheetah-V provides all the memory and I/O resources for embedded computing and control tasks.
The board incorporates the Intel E7501 memory controller that supports a 144-bit wide memory interface comprised of dual 72-bit DDR200 channels. ECC is also incorporated into each channel for single bit error correction and multi-bit error detection. An Intel 82801CA ICH3-S I/O Controller Hub provides extensive system I/O support.
Two 10/100/1000Base-T Ethernet ports are provided at front panel RJ45 connectors, along with USB, keyboard, mouse, serial and VGA graphics interfaces. Additionally, there are USB. serial, parallel, FDD, audio (speaker/mic) and IDE interfaces available via the VME P2 connector.
In addition to an on-board PMC slot, the Cheetah-V has provision for adding two additional high-speed PMC slots with the use of a PMC carrier board. The carrier board occupies the adjacent VME slot on the component side of the Cheetah-V and connects with a high speed mezzanine connector. The PMC carrier also contains two CompactFlash sockets which support 3.3V mass storage devices.
The board auto-detects and will assume system controller functionality when installed in slot 1.

Features

  • Intel Pentium M Processor running at 1.1, 1.6 or 1.8 GHz core frequency and 400 MHz Processor System Bus frequency.
  • Single slot 6U board operates in any slot of a standard VMEbus backplane.
  • Tundra Universe II PCI to VME bridge interfaces to 32-bit or 64-bit VMEbus.
  • Windows® 2000/XP and Linux Operating Systems.
  • 0-55°C operating temperature (ambient).
Memory and Storage

  • Up to 2Gbyte of DDR SDRAM with ECC at 3.2 Gbyte/s peak bandwidth.
  • 1-Mbyte Firmware Hub.
  • 128-Mbytes DiskOnChip Flash.
  • Battery backed Real Time Clock.
  • 2.5" Hard Drive and CompactFlash slots on optional PMC Carrier Board.
Versatile I/O

  • One 64-bit 33 MHz PMC site (IEEE P1386/P1386.1) with I/O connector Pn4 routed to optional VME P0 connector.
  • 16-bit 1.066 GByte/s Hub 2.0 interface to custom connector for high speed PMC expansion card.
  • ATA, FDD and Parallel Port on backplane P2.
  • Two 10/100/1000Base-T Ethernet links to front panel RJ-45 connectors.
  • Two serial ports with one on the backplane P2 and one on the front panel or backplane P2.
  • One USB port on the front panel, three on the backplane P2 connector.
  • PS2 Keyboard and Mouse interfaces on the Front panel.
  • VGA on front panel DB-15 connector.
  • AC97 compliant audio (speaker output and microphone input) on backplane P2 connector.