Features

• Ultra compact MiniITX form factor at 170 x 170mm (W x L)
• Intel 855GM/GME GMCH built-in Intel Extreme Graphics 2 with 266 MHz VGA core, 256-bit 3D/2D graphic engine and Intel Dynamic Video Memory Technology up to 64 MB shared with system memory
• High memory capacity with 1 GB DDR 200/266 SDRAM
• Onboard single / dual channel 18-/24-bit LVDS interface for TFT LCD
• Mini-AGP socket supports DVI / HDTV (Intel 855GM basis) and 4xAGP VGA add-in module (Intel 855GME basis)
• PCI, Mini-PCI, and PCMCIA type-III PC card interface
• Integrated Intel 82540EM Gigabit Ethernet interface
• One 40-pin and one 44-pin IDE port for both of desktop and slim type ATAPI devices
• Integrated AC97 3D 5.1-Channel & S/P DIF audio interface
• IDE-based DiskOnModule and CompactFlash embedded flash disk interface
• External DC jack with +12V or +19V DC input (with external AC/DC adapter)

Form Factor

• Mini-ITX form factor at 170 x 170 mm

CPU

• Micro-FCPGA Mobile Intel Pentium M CPU up to 1.7 GHz+ @ 400 MHz FSB
• On-die 1024KB (1 MB) power-managed Level 2 (L2) cache
• Support Enhanced Intel SpeedStep® technology

Memory

• One 184-pin DIMM socket
• Support up to 1 GBytes DDR 200/266 SDRAM

Chipset

• Intel 855GM chipset with 82855GME GMCH and 82801DB ICH4-M

Watchdog Timer

• Programmable generates NMI or system reset watchdog timer with 1 to 255 sec. / min. of time out value

Power Management

• ACPI 1.0 compliant, supports power saving mode with ATX PSU

Real Time Clock

• Intel ICH4 built-in RTC with onboard lithium battery

PCI Enhanced IDE

• Dual UltraATA/100 bus master IDE channels
• Support up to 4 ATAPI devices on 40-/44-pin IDE ports
• Jumper selectable Vcc power output on 40-pin IDE1 for power cable free DiskOnModule flash disk

VGA Interface

• Intel 855GM/GME GMCH built-in Intel Extreme Graphics 2 with 266 MHz VGA core and 256-bit 3D engine
• Intel Dynamic Video Memory up to 64 MB shared with system
• External DB15 female connector on rear I/O panel

LVDS Interface

• Intel 855GM/GME GMCH built-in Intel Extreme Graphics 2 with onboard Chrontel CH7017A built-in LVDS transmitter
• Resolution up to 1600 x 1200 @ 16M colors
• Support 24-bit Dual channel LVDS TFT LCD
• Onboard 20-pin Hirose DF13-20DP-1.25V connector

TV-out Interface

• Intel 855GM/GME GMCH built-in Intel Extreme Graphics 2 with onboard Chrontel CH7017A built-in TV-out encoder
• External AV RCA and S-Video connector rear I/O panel

LAN Interface

• Intel ICH4 with onboard Intel 82562ET Phy
• Intel 82540EM Giga Mbps Ethernet interface
• 10/100Base-TX auto-switching, IEEE802.3U compliant

Audio Interface

• Intel ICH4-M with onboard ACL650 AC97 3D audio codec
• 5.1 channel, line-in, line-out, Mic-in, CD-in and S/P DIF interface

PCMCIA Interface

• PCI RICOH R5C475II PCMCIA PC card / CardBus controller
• Comply with PCMCIA V.2.10 and JEIDA 4.2 Specification
• 16-/32-bit data bus, support hot swap function
• Mix and Match 5V/3.3V PC Card, 16/32 Card, 3.3 CardBus Card
• One PCMCIA type-I/II slot

Hi-Speed USB 2.0

• Intel ICH4 chipset built-in Hi-Speed USB 2.0 interface with 480 Mbps of data transfer rate and bootable setting in BIOS

Multi-I/O Port

• Intel ICH4 and LPC Winbond W83627HF-AW super-I/O controller
• 1 x RS-232 serial ports, 1 x SPP/EPP/ECP parallel port
• 4 x Hi-Speed USB 2.0 ports with 480 Mbps of data transfer rate
• IrDA port, Floppy port, PS/2 keyboard / mouse port

External I/O Port

• PS/2 keyboard / mouse port
• AV RCA and S-Video TV-out, VGA, Parallel Port
• Dual Hi-Speed USB 2.0, LAN
• IEEE1394, 5.1-CH and S/P DIF Audio

Solid State Disk

• CompactFlash socket supports CompactFlash Card (CFC)
• Support PIO mode 4 up to 16.6 MBytes of data transfer rate
• Default setting as secondary IDE port at master mode
• Bootable, driver free IDE-based flash disk
• Flash memory capacity up to 1 GBytes (and beyond)
• DiskOnModule Flash Disk
• IDE-based, bootable, driver free DiskOnModule flash disk
• PIO mode 4 with 16.6 Mbps of data transfer rate
• Flash memory capacity up to 1 GBytes (and beyond)

Expansion Slot

• One 32-bit PCI slot supports 2 bus master PCI via riser card, and Mini-PCI or Mini-AGP port can be used optionally.

Environment

• Power Requirement: Standard P4 ATX power input
• Board Dimension: 170 x 170 mm (L x W)
• Operation Temperature: 0 ~ 60oC (32 ~ 140oF)

The LV-671MA and LV-671MP are intended for OEM applications. BWI requires first time buyers of either board to purchase a LV-671 Engineering Kit. The LV-671 Engineering Kit includes:

• LV-671 (MA or MP) with processor fan and heatsink
• 1.7GHz Pentium M processor
• 512MB DDR266 (PC2100) RAM
• SPD-080-12A AC-DC Adapter with 12V, 80W 4 pin Mini DIN output connector

First time buyers who insist on purchasing the LV-671MA or MP as a stand-alone product agree that they are knowledgeable computer professionals who have read and understand the manual and are capable of procuring, installing, and troubleshooting the correct components normally supplied with the engineering kit. BWI will not provide assistance or support in procuring, installing, or troubleshooting items normally supplied with the engineering kit to those customers who elect not to purchase the engineering kit.