- CPU : Transmeta CrusoeTM Processor Model TM3200 400MHz
- System Memory : One 144-pin SO-DIMM socket ( 128MB SDRAM Attached )
- System Chipset : TM3200 / VT82C686A
- BIOS : Award PnP Flash BIOS
- Video Controller :
- CHIPS� 69000 LCD/CRT VGA
- BUS : PCI
- V-RAM : 2MB RAM ON CHIP
- Resolution : 1280 x 1024 ( 256 colors ) for CRT display
- Connector :
- DB-15 for CRT display
- 50-pin pin-header for 36-bit LCD panel
- Super I/O :
- 1 x RS-232 port
- 1 x RS-232 / 422 / 485 selectable port with Auto-Direction RS-485 function
- 1 x Parallel port ( support SPP/EPP/ECP mode )
- 1 x IrDA port
- USB Ports : Tow ports by pin-header, USB ver.1.1 compliant
- Ethernet : Realtek RTL8139C 10/100Mbps Ethernet chip with RJ-45 connector
- IDE : One port by 44-pin pin-header, support Ultra DMA33 mode
- FDD : One port
- Software Programmable WatchDog Timer
- SSD : One CompactflashTM Type II socket
- One PC/104 expansion connector for add-on cards
- Power Consumption : +5V @ 1.7A ( with 128MB SDRAM )
- Operating temperature : 0 ~ 60oC ( CPU needs cooler )
- Relative humidity : 5 ~ 95%, non-condensing
- Applicatoin Note
Transmeta CPU (TM3200/TM5400) uses software to emulate X86 instructions. Therefore, it needs 1MB space to store CMS CODE (Code Morphing Software). The 1MB Code will be de-compressed into 16MB instructions and occupied the system memory when boot-up. The DRAM type must be predefined (ex. 8M X 16 bits) for this reason. For example, a system with 128MB memory has 112MB ready for use after 16MB RAM is occupied.
|
|
