| | | |
|
| | |
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: PC-588 Low Power SBC |
Manufacturer: Gpc technology ltd. | PC/104 low-power 6x86 Module, Geode 6x86-166/233/300/333 MMX CPU, TFT LCD/ CRT, RS-232/422/485, PC/104, IrDA, USB, WDT, Single +5V, IDE, FDD, Parallel, Optional 8MB~192MB IDE Flash Disk |
Product Status: Discontinued - This product is no longer in production. This page is maintained for informational purposes only. Stock Status: Not Available |
Recommended replacement: PM-1043-64MB |
|
|
|
CPU+Chipse NS Geode GXLV/GX1 & GX5530A
- CPU+Chipse NS Geode GXLV/GX1 & GX5530A
chipset with built-in 6x86-166/233/300/333 MMX CPU,
GXLV support low-power 0~85°C CPU (1.5~5.4W),
GX1 support very low-power 0~85°C CPU (0.8~3W)
- Cache Memory: 16KB L1 cache memory
- I/O Chipset: NS PC97317
- BIOS: Award BIOS, 128KB (Flash) EPROM
- DRAM: 1 x 144-pin SO-DIMM socket on solder side, support 32MB ~ 128MB SDRAM
- LCD/VGA w/ MPEG II SMA 64-bit LCD/CRT,,support CRT and 18-bit TFT LCD flat panel up to 1280x1024x8 BPP and 1024x768x16 BPP, support MPEG1 and MPEG2 assist, 41-pin LCD connect
- USB x 2 Pin header
- IrDA: Pin header
- Optional IDE Flash Disk: Daughter board support 8/16/32/64/96/128/192MB IDE Flash Disk
- Bus type: PC/104 Connector
- Speaker: Buzzer on Board
- CMOS Backup: Backup by Li battery
- PS/2 Keyboard: 5-pin header
- PS/2 Mouse: 5-pin header
- IDE Interface: support one port up to 2 x IDE devices
- FDD: Two 3 1/2" or 5 1/4" FDD, Drives A, B swappable
- Parallel Port: One bi-directional SPP/EPP/ECP parallel port configured as LPT1,2,3
- Serial Port x 2: 16-byte FIFO 16C550 serial port jumper selectable RS-232 x 1 + RS-232/422/485 x 1
- Watchdog Timer: Programmable 0 ~ 30 sec.
- Miscellaneous Connectors/Jumpers: Reset, HDD LED, 2-pin/3-pin single +5V power connector
- Power Requirement: Single +5V power by using 2-pin/3-pin connector
- Operating Temperature 0 ~ 60°C ,0 ~ 85°C CPU just need metal cooler (CPU don’t need fan).
|
|
|
|
|
|