 | | | |
|
|
|
| | |
|
|
| Model: P4BGAP |
| Manufacturer: Commell | | Same as P4BGA but with 400 MHz FSB and without AGP Interface
(2 x PCI Expansive Riser Card in Packing)(OEM product subject to minimum order requirement). |
| Product Status: Discontinued - This product is no longer in production. This page is maintained for informational purposes only. Stock Status: Not Available |
|
| |
|
|
|
Form Factor Mini-FlexATX at 170 x 245 mm (W x L), standard Mini-FlexATX form factor
Form Factor Mini-FlexATX at 170 x 245 mm (W x L), standard Mini-FlexATX form factor
CPU Intel mPGA478 Pentium 4 / Celeron CPU up to 2.4 GHz+ @ 533/400 FSB
Intel 0.13/0.18-micron Northwood / Willamette Pentium 4 / Celeron CPU
Memory 2 GB PC1600/2100 DDR SDRAM on 2 x 184-pin DIMM slots
Chipset Intel Brookdale-G/GL chipset with 82845G/GL MGCH and 82801DB ICH4
Watchdog Timer Generates system reset with 1 to 255 sec. / min. of time out valu
Real Time Clock Intel ICH4 built-in RTC with onboard lithium battery
Power Management ACPI 1.0 compliant, supports power saving mode with ATX power supply
PCI Enhanced IDE Dual UltraATA/100 bus master IDE channels up to 4 ATAPI devices
VGA Interface Intel 845G/GL MGCH built-in VGA controller with 3D/2D engine
One 4x AGP port supported additional AGP VGA card
LAN Interface Intel PRO/100+ 10/100Base-Tx Fast Ethernet interface
10/100 Mbps of data transfer rate, full duplex, IEEE802.3U compliant
Audio Interface AC97 3D audio with line-in, line-out, micphone-in and CD-in interfaces
IEEE 1394 Interface VIA IEEE 1394 controller with internal 1394 connector
Milti-I/O Port Intel ICH4 and Winbond 83627HF-AW LPC super I/O controller
2 x RS-232 serial ports, 1 x bi-direction SPP/ECP/EPP parallel port
4 x USB ports, USB version 2.0 compliant, 480 Mbps of data transfer rate
PS/2 keyboard and mouse, FDD port, SIR IrDA port
External I/O Panel PS/2 Keyboard and mouse
LAN, dual USB 2.0
Parallel port, serial port, VGA
Game port, audio line-in/line out/mic-in
Environment Power Requirement: ATX power supply, free for P4 +12V power cable
(Accept ATX power supply without additional +12V power output)
Board Dimension: 170 x 245 mm (W x L)
Operation Temperature: 0 ~ 60 oC (32 ~ 140oF)
|
| More Info |
|
|
|
|
|
|
|
|
