 | | | |
|
|
|
| | |
|
|
| Model: ETX-5800-733 |
| Manufacturer: ICP | | Transmeta TM5800 733MHz ETX CPU Module |
| Product Status: Discontinued - This product is no longer in production. This page is maintained for informational purposes only. Stock Status: Not Available |
|
| |
|
|
|
ETX modules can be utilized as components by plugging into an application-specific baseboard and putting the core CPU and subsystems together with sound, SVGA, Ethernet and additional I/O. The module connects to the rest of the embedded system through high-density, low profile SMT connectors, which carry both ISA and PCI bus signals as well as dedicated I/O interfaces. The mechanics of the interconnection of an ETX/baseboard system is physically the same height as a one-board solution. ETX modules are interchangeable, allowing system designs to be scaleable.
Unique design of LAN placement:
In order to avoid any unwanted interruptions, IEI places the LAN function on the baseboard, in order to provide better performance and reliability. Therefore, the chip and transformer won't be affected by noise signals in communication.
ETX-5800-733 Features:
- Processor: Transmeta TM5800 733MHz
- Chipset: VIA VT82C686B
- Graphic Controller: C&T 69030
- Graphic Memory: 4MB RAM on chip
- LCD Interface: 36-bit Dual Channel LVDS
- DRAM Slot: 1x 144-pin SO-DIMM support up to 512MB
- I/O Interface: 2x IDE ATA-100
1x LPT/FDD
2x RS-232
4x USB 1.1
1 x PS/2 - Audio: AC' 97 Codec
- WDT: Software Programmable
1~255 sec. System reset
- Power Management: ACPI
- Power Consumption: 5V@1.0A; 5VSB@0.1A
(TM-5800-733MHz 128MB SO-DIMM)
- Operation Temp.: 0~60oC
- Relative Humidity: 0~95%, Non-Condensing
|
|
|
|
|
|
