| | | |
|
| | |
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: FR-2057S |
Manufacturer: ICP DAS | 16-channel isolated digital output module with 3-pin shroud connector
|
Product Status: Discontinued - This product is no longer in production. This page is maintained for informational purposes only. Stock Status: Not Available |
|
|
|
|
The FR-2053/2053T/2053S has 16-channel isolated photocoupler input, while the FR-2057/2057T/2057S has 16-channel isolated photo-coupler output. The default signal connector of FR-2053 and FR-2057 is a 20-pin header. The "T" stands for screw terminal connector and the "S" stands for 3-pin shroud connector. Each 3-pin connector has one Vcc pin, one ground and one signal pin. According to different applications, the users can choose suitable modules. The FR-2000 I/O module has an FRnet interface. The users can daisy chain several FR-2000 modules together. Via FRnet, the FR-2000 modules can extend the remote I/O control of PC, PAC, PAC and PLC easily.
Features
- 2-wire cabling: CPEV 0.9 (2P twisted-pair cable), When different cables are used, the transmission distance may change.
- Power consumption: 2.0 W (Max.)
- Operating temperature: -25 C to +75 C
- Operating humidity: 10% ~ 95% RH, non-condensing
- Storage temperature: -30 C to +85 C
- Storage humidity: 5% ~ 95% RH, non-condensing
- Weight: approximately 120g
- Dimensions: 99 mm x 32 mm x 83 mm
- Output method: Isolated type NPN transistor open collector
- Output points: 16 points
- Output current: less than 30V@100mA/channel
- Load voltage: 24V max
- Turn-on delay time: less than 1.0ms
- Turn-off delay time: less than 1.5ms
- Transmission:
- Transfer speed: 250Kbps
- Cyclic scan time: 2.88ms
- Transfer distance: Max. 400m
|
| More Info |
|
|
|
|
|
|
|