 | | | |
|
|
|
| | |
|
|
|
This image is representative of the product and may not be the exact image of this product.
| Model: EEERXB16-2B1A |
| Manufacturer: Adex Electronics | | PCI Express triple CONN riser; B side top, PE-X16 w/2.5in. cable; B side low, PE-X8 w/4.5in cable; A side PE-X16 to gold finger and 1in. cable |
| Product Status: Active - Active products are produced on a regular manufacturing schedule and are actively supported products. Active products are not necessarily in stock in the USA. Lead time to ship date for Active products is typically stock to 15 business days ARO. Stock Status: Call |
|
| Get Quote -> |
|
|
|
| EEERXB16 is a three slot PCI Express X16 right angle riser. It can support up to three independent PCI Express X16 buses. It usually plugs into the slot 6 position of the motherboard. The middle PE-X16 connector connects directly to the riser's gold finger. The top and the bottom PE connectors are connected to two other PE buses on the M/B via two flexible cables. All connectors are mounted on the B side of the riser card. The bottom connetor sits on a add-on PCB, which protrude about 0.062" toward the B side. This riser is designed for chassis with three horizontal cutouts that line up with the typical slot 6 position of the motherboard. Any of the PE connectors on the riser can be configured to X1, X4, X8 or X16. The connector centers are 1.08", 1.88" and 2.68" height. The overall dimension of the main board assembly is 2.91"H x 7.10"W. All height dimensions are referenced to the bottom of the board. The cables can be ordered in various lengths, depending on the location of the PE slots on the motherboard.
|
|
|
|
|
|
|
|
