All models of the EIS series segment the Ethernet network into separate collision domains. The switch functions as a "bridge" between various data links creating a larger network diameter than can be achieved with repeating hubs. Each port automatically negotiates with its attached device the data rate (10 or 100 Mbps) and duplex (full- or half-) for that port. The flow control mechanism is also negotiated. For Full-duplex segments, the PAUSE scheme is used. For half-duplex segments, the backpressure approach is automatically invoked. The switch learns the port locations of Ethernet devices by reading Ethernet frames and observing source addresses. The switch then creates and maintains a table of source addresses and corresponding port assignments. From that time on, traffic is restricted to only those ports involved in a transmission. This allows for improved throughput since simultaneous transmissions can now be initiated on those ports without activity. Table values are aged to automatically accommodate changes to the field wiring.

If a broadcast, multicast or unicast transmission to an unknown destination is received on a port, all other ports are flooded with the transmission.

Features

• 10BASE-T/100BASE-TX/ 100BASE-FX compliant
• Provision for redundant power connections
• Shielded RJ-45 or SC/ST-style fiber optic connectors
• LEDs for link/activity, data rate, power and loop detection
• Auto-negotiated data rate, duplex flow control on twisted-pair ports
• Easy DIN-rail installation
• Full- or half-duplex
• Industrial environment EMC compatible
• Broadcast storm control
• CE Mark
• Multimode or single-mode fiber
• Wide-range, low-voltage AC or DC powered
• UL 508 and UL 1604 Class I, Division 2 Listed
• UL 864 Recognized (select models)